All About Epoxy Garage Ground Coating Systems

Why have an epoxy garage ground? Normal garage floors are just plain gray concrete. Above time, stains from grease, oils, and chemicals result in simple gray concrete to become an ugly eyesore. Getting an epoxy garage ground coating will give you a long time of provider, toughness and will resist most stains as nicely as provide you with a wonderfully, concluded surface to maintain the worth of your property.

The Most Common Epoxy Ground Coating Techniques

There are a few typical systems available that will enhance your garage ground:

one. amazinggaragefloors.net/garage-floor-kansas-city & Polyurethane Reliable Colour Program

two. Epoxy Chipstone (partial vinyl chip broadcast) with Polyurethane Leading Coat Program

3. Epoxy Granitex (a hundred% vinyl chip broadcast) with Polyurethane Best Coat System

Maintain in thoughts that with these a few epoxy systems, you have ‘good’, ‘better’ and ‘best’ types of epoxy garage floor programs.

The Great System

The epoxy polyurethane solid shade system will last roughly 5-7 several years, servicing cost-free, but will demand a upkeep coat of pigmented polyurethane. This garage flooring coating is usually a two-coat, slender movie technique ranging in thickness from 4-20 mils. It is applied by roller or airless sprayer.

The Better Program

The epoxy Chipstone program will final roughly 7-twelve many years, servicing totally free prior to needing a upkeep coat of very clear polyurethane. This epoxy garage ground technique normally is composed of 1 pigmented primer coat of epoxy a pigmented coloration coat with a partial/mild broadcast of vinyl chips into the moist epoxy and a one coat of clear polyurethane for protection. The thickness is approximately twenty-thirty mils.

The Ideal Program

The epoxy Granitex system can last as lengthy as 12-fifteen+ a long time, upkeep free ahead of needing a routine maintenance coat of polyurethane. This epoxy floor coating is usually one particular pigmented primer coat a pigmented coloration coat with a one hundred%/full broadcast of vinyl chips and two coats of clear polyurethane.

Preparing

Suitable surface area preparation is crucial to the extended expression good results of the set up. All surfaces to be coated need to be cleaned of contaminants which might interfere with bonding. Concrete should be acid-etched, shot-blasted or diamond-floor to accomplish a profile equivalent to a hundred and twenty grit sandpaper. After planning, the concrete surface must be inspected for holes and cracks. If holes or cracks are prevalent, then patchwork need to be performed. Once preparing is full, installation is all set to begin.

Set up of Granitex Epoxy Garage Floor Technique:

one. Area planning, patchwork and roll one particular coat of pigmented epoxy primer.

2. After epoxy primer is dry, examine, prep and roll one particular coat of pigmented epoxy above primed spot. Operate in 10×10 or 12×12 sections at a time. Whilst epoxy is soaked, broadcast vinyl chips into damp epoxy. Be positive the region receives one hundred% protection. When all sections are entirely lined, permit dry extensively.

three. Once all sections are dry, scrape, sweep and vacuum all extra Granitex vinyl chips from the area. Implement a skinny coat of polyurethane to lock and lay vinyl chips down.

4. When the polyurethane is dry, apply a second coat for a closing top coat. As an alternative, non-skid resin sand can be additional to increase the slip resistance.

All epoxy garage ground coatings can be effortlessly cleaned with mild, liquid detergents then mopping, hosing or even “swiffering”. Grease, oils, and most chemical substances will not stain or soak up into the epoxy coated flooring.